Vizio Universal Remote Codes Full List (2023) – PC Webopaedia

If you have a Vizio TV or any other TV, you must first program your remote before you can turn it on or watch channels. This process involves connecting your remote control to the TV. The remote control is available with the Vizio TV or can be purchased separately when you purchase it.

Vizio Universal Remote Code List

Remote controls that you can pair with any TV are universal remote controls. You can configure these remotes by entering the GE remote code to program them. We have developed this detailed guide for you by providing an extensive list of Vizio universal remote codes, so read on.

Universal remotes are the remotes that come with Vizio TVs that can also power other devices. You can check if your remote is a regular or universal remote by checking its buttons.

Check if your remote has To define and: Mode: buttons. This indicates whether your remote is a universal remote and can be used with other Vizio devices.

Universal remote controls have a wide variety. For example, you can buy one that has more compatibility options to power a larger number of devices. In addition, GE universal remotes are more affordable than conventional remotes, costing less than ten dollars.

You need a compatible remote code to pair your Vizio TV or any other device with your universal remote. After pressing a button or a series of buttons, your Vizio TV will ask you to enter the code before you can continue.

GE (General Electric) universal remote control codes can be entered. GE remotes come with a matching list, so check if the TV supports CL3, CL4 or CL5 codes. This information is located on a label on the back of the remote control’s battery compartment.

Sometimes, the entered code does not work. That’s why there’s an exhaustive list of GE remote codes that you can replace if one or the other code doesn’t work. Remote codes can be two, three, or four digits long. A list of all Vizio TV remote codes is given below.

A list of two-digit remote control codes

List of three-digit remote control codes

  • 505
  • 113:
  • 004:
  • 011:
  • 627
  • 502
  • 081:

A list of four-digit remote control codes

If you have two different Vizio TV models, it’s unlikely that the same remote control codes will work on both. Below is a detailed list of universal remote control codes, sorted by the date of manufacture of the TVs.

V1 codes for 2006-2011 models

  • 1168
  • 0081:
  • 0143:
  • 0112:
  • 0050:
  • 1011
  • 1169

Mixed V2/V4 codes for 2011-2012 models

  • 5115
  • 5138
  • 5343
  • 5109
  • 5139
  • 5450

V2 codes for 2011 models

V4 codes for 2011 models

  • 5139
  • 5115
  • 5138
  • 5450
  • 5343
  • 5109

Mixed V3/V5/CL3/CL4/CL5 codes for new models

  • 5571,
  • 6121
  • 5641
  • 5711
  • 1471
  • 5681
  • 5581
  • 4081
  • 5611
  • 3851
  • 3741
  • 5601
  • 5561
  • 5621
  • 3351
  • 6111
  • 3651
  • 5701
  • 5671
  • 5591
  • 2901
  • 6471
  • 2021
  • 5691
  • 5651
  • 5631
  • 6511
  • 5661
  • 6131
  • 1741

V3 codes in 2012

  • 3851
  • 1471
  • 2901
  • 1741
  • 2021
  • 3741
  • 3651
  • 4081

V5 codes were produced around 2013

  • 3851
  • 1741
  • 2901
  • 4081
  • 2021
  • 1471
  • 3651
  • 3741
  • 3351

CL3 GE codes Manufactured after 2013

  • 1471
  • 5711
  • 5631
  • 1741
  • 5641
  • 2901
  • 3741
  • 2021
  • 5651
  • 5681
  • 5621
  • 5611
  • 5701
  • 5571
  • 3851
  • 5601
  • 5671
  • 5661
  • 5581
  • 5591
  • 3651
  • 5561
  • 5691
  • 4081

CL4 GE codes Manufactured after 2014

  • 5711
  • 6121
  • 6111
  • 5631
  • 6131
  • 5651
  • 5561
  • 5611
  • 5621

CL5 GE codes Manufactured after 2015

  • 6471
  • 6131
  • 5561
  • 6121
  • 5651
  • 6511
  • 6111
  • 5621
  • 5611
  • 5631
  • 5711

A list of five-digit remote control codes

These codes are compatible with DirecTV cable remotes.

  • 10178
  • 11756
  • 10885
  • 10864
  • 11758
  • 01377
  • 10120
  • 10117

If one of the codes doesn’t seem to work, you can always move on to the next one in the extensive list. This list is also in the instruction manual of the TV you purchased. Now you need to program your remote with Vizio TV or other gadget with one of the GE Universal Remote Codes above.

Method number 1: Manual method

There are a number of steps involved in entering your universal remote codes. The following guide applies to all Vizio TVs, including LCD, LED and Plasma TVs.

  1. Switch on the TV you want to program your Vizio Remote to.
  2. Find it television the button on the universal remote control. Press the button to enable learning mode Adjustment the button.
  3. Press the TV button five second to the LED light flares up twice.
  4. Using the number buttons, enter the GE Universal TV codes above. LED light is required flash: after entering each number. LED: is blinking twice and: switches is disabled if the code you entered accepted.
  5. Point at the Vizio TV and press the power button to test if your remote works. Setup is complete if the device turns around off.
  6. The code was not accepted if the device does not turn off. Repeat the steps and use a different the code until the device turns on.

Method number 2: Automatic method

The automatic method allows the remote to loop through the remote codes that are already in its memory banks.

  1. A turn on the TV with its power button as the remote still needs to be programmed.
  2. Hold on Adjustment button for five second until a red light appears.
  3. Press and hold the button power the button at five-second intervals until the TV turns off.
  4. After your Vizio TV is turned off, power turn it back on.
  5. Keep clicking Volume Up button for three second at various intervals before the broadcasts on television.
  6. Press TV button on the remote control to save the code. This prevents the need for constant reprogramming.

To confirm if the codes have been accepted, use one of the buttons on your remote control to check if it matches the TV. Vizio apps and the Internet on a Vizio TV cannot be accessed using the universal remote control. A standard Vizio remote control is required.

Sometimes the device does not turn on even after entering the remote control codes. This could correspond to either a problem with the device or the way the codes were entered. For example, the following reasons may be why your remote control does not work with the device.

Reason #1: Battery issues

Your remote control may have a battery problem. First, check if the batteries are oriented correctly. If that doesn’t work, consider replacing them. Make sure you keep the remote control away from wet places that damage the batteries.

Reason #2: Wrong codes

When entering universal remote control codes in a hurry, you may accidentally enter the wrong numbers. So make sure the correct numbers are added correctly by checking the universal code list again.

Reason number 3: Object obstructions

If any object is blocking your remote control or Vizio TV, remove it. Make sure there is nothing in front of the TV when watching or tuning in channels.

Reason #4: New TV and old codes

If you have a newer Vizio TV, the older universal remote code probably won’t work on it. Try to replace the list of codes produced after the release of the TV model. Do this instead of copying remote codes from another TV’s instruction manual.

Connecting your TV to a universal Vizio remote control is a relatively simple process, detailed in the guide above. We hope that the extensive list of GE Universal Remote Codes will help you connect your TV to your Vizio remote control.

Leave a Comment