How to recover files from a damaged or inaccessible drive with TestDisk. – wintips.org

When your hard drive is corrupted with all your important data, all your data will be unavailable and you won’t be able to access it anymore. It was a nightmare for all of us who were in this situation and we realized that saving the last copy of our critical files on other media is a simple matter. the most important lesson we should always bear in mind and the most important action we should always take. In this article, you can find instructions on how to recover files from a damaged disk.

Is it possible to retrieve data stored on a damaged disk?

First of all, you should know that when your drive is damaged (so you can’t access your data), it means two things:

1. Hardware problems: Hardware disk damage means that the hardware components of the disk are malfunctioning. A common way to monitor your hard drive for hardware problems is to listen carefully for noises from your hard drive when your operating system (or you) tries to access it. If you don’t hear any noise or if you hear a repetitive hissing sound, it means that there is physical damage to your hard drive. In this case, the best option you have is to contact a data recovery professional to recover your data, but before doing that, you can try the steps described in this article. restore your files yourself.

2. Software Issues: A software problem means that your operating system has detected a damaged disk {(Hard Disk Drive (HDD), USB Disk, Pen Drive, etc.) but you cannot access the data on it. Software malfunctions can occur for several reasons: for example, power failure, forced removal of your storage device (such as external USB hard drive, USB pen drive, etc.) without using the safe removal option, or due to the deteriorating health of your hard drive. working time. If you find yourself in this situation, continue reading this article to learn how to recover your files.

How to recover data from hard drive or other storage device (HDD, USB Drive, SD card or Pen drive).

Before proceeding with the following steps, first make sure your drive can be recognized by your computer. To confirm this, log into your operating system and “Disk management” to see if your drive is listed. For this:

Click at the same time Windows key + R to open the run command window.

Inside to search (run) in the command window type: diskmgmt.msc and press Enter.

image

In Disk management see if the damaged disk is listed in the window (see screenshot example).

image

If your disc recognized* inside disk management, but you still can’t access your files because:

Previous forced removal without using a storage device (“Safe shutdown” option), then follow the steps in this article to restore the files to another location, and then try to restore the corrupted partition table using the instructions in this article: How to fix: You must format the disk before using it.

– Other (unknown) Proceed with the following steps to recover missing files (data) after the reason(s).

*Note: If your the disk is not recognized Once you’re in disk management and you’re sure you’ve properly connected it to your computer, you should visit a data recovery professional to retrieve your data.

How to recover lost data (files) using TestDisk.

To recover files from a damaged disk, you need to download TestDisk convenience.
TestDisk utility is a powerful FREE data recovery software! This is primarily intended to help recover lost partitions and/or re-boot unbootable drives if these symptoms are caused by faulty software, certain types of viruses, or human error (e.g. if caused by accidentally deleting the partition table).

Attention: Keep in mind that you follow this guide at your own risk and you should be very careful with the steps in it to avoid losing your data.

Step 1. Download the Testdisk utility to your computer.

1. Go to http://www.cgsecurity.org/wiki/TestDisk and download Test drive convenience.

image

2. Click to download TestDisk version according to your operating system. (eg Windows).

image

3. When the download process is complete, go to the download location folder and right click on “testdisk-7.0-WIP.win.zipSelect “compressed file and “Take it all apart” to unzip its contents.

image

.

Step 2. Use Testdisk utility to recover files.

In this step, you can learn how to use TestDisk for file recovery (recovering files from a damaged hard drive).

1. First, connect the damaged hard disk drive (HDD) to your computer.

2. Learn now”testdisk-7.0-WIP.win” volume contents and double click to runtestdisk_win.exe” application.

restore testdisk file

2a. click onYes” in the UAC warning message.

image

3. Yes TestDisk the first screen of the utility, press “.Enter” highlighted “ atTo create” option.

Restore files

4. wait until TestDisk scans your computer for connected drives.

File Recovery Test Drive
5. Using the keyboard arrow keys Carefully select the damaged hard drive and clickEnter” toKeep going‘ to disk analysis.

image

6. On the next screen (using the keyboard arrows), select the type of partition table (for example, Intel) and press “.Enter“.*

*Note: Meanwhile, TestDisk the utility will (usually) recognize the correct partition table type and highlight it automatically. Partition Table Type for Windows OS “Intel“.

image

7. On the next screen, click “Enter” at “Analyze” option and permission TestDisk Utility to analyze HDD and find missing partition table structure.

image

8. After disk analysis, TestDisk should display the current partition structure. Click on “Enter” again and allow TestDisk toQuick search” for the missing partitions on your disk.

image

9. If TestDisk can find the missing section(s) duringQuick Search’ operation, then you will see a screen similar to the one below. Click on “PPress the ” key on your keyboard to make sure your files are in the partition found.

image

10. At this point, two different things (situations) can happen:

Case 1. If you see a list of your lost files on your screen like the screenshot below, go to step 3.

image

Case 2. If TestDisk cannot open (recognize) the file system or the file system is damaged, you should use it to perform a deeper search. TestDisk Utility to find missing partitions. For this:

a. Click on “Q” to exit this section and return to the previous one.

image

b. On the previous section screen, click “Enter“.

image

c. Click on “Enterto do “one more time”.Deeper search“.

image

d. Now be patient TestDisk analyzes your disk. (This operation may take some time).

image

e. When Deeper search the operation is complete, click “P” again to see if your files are listed. If you are in the list of files, go to the next step.

image

Step 3: Copy your files from the damaged drive to another storage device.

1. As mentioned above, after your files are successfully recognized (listed)., press the button a press the button on your keyboard select all found files and then press the button C” button to copy all files. (Recommended option).

OR

Use the keyboard’UP‘ & ‘DOWN‘ arrow keys to find the folder whose contents you want to restore, and then “c” button to copy the current file/folder. *

*Note: If you want to explore the contents of a folder, click after navigating to the folder That’s right bullet or Enter Key.

2. Then press the button C button to copy all selected files.

Available options:

  1. press h button to hide deleted files/folders.
  2. press : to select the current file/folder.
  3. press a to select all files/folders.
  4. press c button to copy the current file/folder.
  5. press C button to copy all selected files/folders.
  6. press Q give up

image

2. Now you need to select (specify) a new destination folder for copying the files. Meanwhile:

– “click”Y” to start copying the selected folder(s) and its contents to the default location*

* The standard target (for the copy process) this is the folder where “TestDisk” is running. (where you issued “testdisk-7.0-WIP.win.zip” file in step 1).

OR

– “click”N” and use the keyboard Ok Click the buttons to select another location to save the selected files/folders, and then press the “C” button to start the copying process.

image

3. Now wait until TestDisk moves all the selected files from your damaged disk to the new location.

image

4. When the copy operation is complete, you will see the “Copying is complete!” message.

Then, if you want to recover another folder (or file) from your damaged drive, repeat the same steps to do so, OR press the buttonQ” button several times, “TestDisk” convenience.

image

5. Finally, navigate to the destination location to find the missing files.

You are done! If you follow the above procedure correctly and with a little luck, you should be able to successfully recover all your files from the damaged storage device! A smile

If you found this article useful, please support us by donating. Even $1 can make a big difference for us We continue to help others while keeping this site free:

Leave a Comment