How to Install Teredo Tunnel Adapter –

Teredo tunnels An adapter is a virtual device that acts as a translator between IPv4 and IPv6 networks. Nowadays, most computers are connected to the Internet using an IPv4 connection without direct (local) connection to IPv6 networks. This problem can be solved by using Teredo Tunneling technology, which allows an IPv4 network to communicate with an IPv6 network and vice versa. Teredo Tunneling is a temporary solution that is disabled when IPv6 connectivity becomes natural on the network.

In this guide, I will show you how to install Teredo Tunneling on Windows 8, 7 and Vista.

How to install the Microsoft Teredo tunnel adapter

Step 1. Install the Teredo tunnel adapter (add the old hardware).

1. It’s open Device Manager. For this:

  1. Click on “WindowsImage-201_thumb8_thumb4 + “RClick the ” button to download Running dialog box.
  2. write “devmgmt.msc” and click Enter.


2. Specify your computer name and rom Movement menu selection Add old equipment.


3. press The next one.

add hardware wizard

4. Choose Install manually selected hardware from the list (Advanced) and press The next one.

manually select hardware to install

5. Choose Network adapters and press The next one.

add network adapters

6. highlight the Microsoft select a manufacturer Microsoft Teredo Tunnel Adapter and press The next one.


7. press The next one To begin installing the Microsoft Teredo tunnel adapter.


8. press Termination when the installation is complete.

Microsoft Teredo Tunneling Adapter-installation

9. Make sure the Microsoft Teredo Tunneling Adapter is installed successfully. To do this, you need to enable the visibility of hidden devices: from Appearance menu selection Show hidden devices.

show hidden devices - device manager

10. Expansion Network adapters. The Microsoft Teredo Tunneling Adapter should be listed there. *


  1. If you see an exclamation mark on the Microsoft Teredo Tunneling Adapter, Teredo Tunneling Adapter will not start – Follow this guide to resolve the Code 10 issue.
  2. If the Microsoft Teredo Tunneling Adapter does not work or does not appear in the device manager after a reboot, then you need to enable the Teredo client using this guide: Teredo Tunneling is installed but not in the Device Manager or after a reboot gives error code 10.


11. Restart your computer and you’re done!

How to verify proper installation and functionality of Teredo Tunneling.

Step 1. Check the status of the Teredo tunneling adapter:

1. go to Start > All Programs > Accessories.

2. It’s open Command line.


3. Type the following command in the Command Prompt window and click Enter.

  • netsh interface shows teredo status


– If the MS Teredo Tunneling Adapter is working properly, you should get an output screen similar to this:


Additional Notes for Teredo State:

Type: customer This means that teredo tunneling is enabled on your computer. If Type shows disabled then teredo tunneling is disabled on your computer.

Country: motionless teredo means tunneling motionless right now. The State is changed to qualified When you run an IPv6-enabled program that uses Teredo (eg Windows Remote Assistance).

Step 2. Check if the Teredo Tunneling Adapter can correctly resolve IPv6 domain names.

The easiest way to verify that the Teredo Tunneling adapter can correctly resolve IPv6 domain names is to ping your hostname using the ping v6 command. For this:

1. Find your computer name by going to Start > Control Panel > System.

2. Note the name in the Computer Name field.


3. Open a command prompt window, type the following command, and click Enter.

(for example, in this example Computer Name is “Win7VM1“. So the command should be: “ping -6 Win7VM1″ ).


4. If the Teredo tunnel adapter can correctly resolve IPv6 domain names, you should see a response screen similar to this.


That’s it!

If you found this article useful, please support us by donating. Even $1 can make a big difference for us We continue to help others while keeping this site free:

Leave a Comment