How To Extend PS5 Controller Battery Life (2023) – PC Webopaedia

If you own a PS5 Dual Sense controller, you’ve probably experienced its superiority over the PS4 controller. It’s an elite gamepad with great tactile controls. However, despite being an exclusive console, the PS5 Dual Sense controller is still prone to battery drain. Battery life depends on how efficiently you use the battery, so it should be monitored at regular intervals.

How to check PS5 controller battery life

If you’re wondering how to check the battery life of your PS5 controller, you’re in luck. We’ve put together this intuitive guide to help you check your battery and prevent excessive battery drain on your controller.

How long does a PS5 controller last?

A PS5 controller’s battery life should ideally last 12 hours in total. If you don’t play a lot of games that require a lot of power, it can even go up to 15 hours. However, users have complained that the low battery level appears after only six hours. This is because some games consume more power than others, forcing you to charge again and again.

Even though the six hour mark indicates that the battery is dead, that doesn’t mean it will turn off at this point. The PS5 DualSense controller can still play another four hours of gameplay. However, it is not recommended to continue playing with a low battery.

The PlayStation5 is currently powered for a decade. If you take good care of your DualSense controller, you may not need to keep replacing it. Thus, it is vital to monitor battery life to prevent unnecessary drain on battery health.

Why your PS5 controller might run out of power quickly?

There are a number of reasons why your Dual Sense PS5 controller’s batteries can drain very quickly. First, the batteries may be old and need to be replaced. You can also charge the controller incorrectly. Below is an extensive list of possible causes of this issue.

Cause #1) The controller did not charge properly

Your PS5 controller may be draining the battery quickly because it hasn’t been charged properly. Not all USB chargers are compatible with the DualSense controller, so buy a suitable cable Make sure the type A end of the cable is firmly pressed into the charging port. If it won’t charge, move it to another Type-A port on your PS5.

Reason #2) Specific games consume more battery

Some games put a lot of load on the controller, so it drains much faster. These games require more button presses than average. They also cause the controller to vibrate more, resulting in more significant battery drain. If you play such games often, it can drain your battery health.

Cause #3) The controller is overloaded

Overcharging your PS5 controller causes its batteries to heat up. This can ruin your battery life per session and can reduce battery health overall. The DualSense controller fully charges a depleted battery in 3 hours. Make sure to remove it after the three hour mark.

Reason #4) The controller was not properly shut down

When your controller is not in use, be sure to turn it off; otherwise, it will continue to slowly discharge. Make sure it is properly disconnected from the PS5 and turned off after finishing the game.

How to check PS5 controller battery life

To maintain the health of your controller battery, it is recommended to regularly monitor the battery level by checking the battery life. This can be displayed on either PS5 or your PC. Both methods are listed below.

For PlayStation5

  1. Press and hold the button PlayStation button on your controller. It Control center will appear.
  2. Navigate to Accessories icon at the bottom of the screen.
  3. The display will show you the battery level on your DualSense controller.

The display tab will also tell you if your DualSense PS5 controller is about to run out of power. If this is the case, make sure you charge it before discharging it.

For computers

Checking PS5 Controller battery life on PC requires a few more steps than on PlayStation5. There are two methods you can use.

Method #1) Using DS4Windows software

  1. Connect the PS5 controller to your computer.
  2. Download and install before checking battery life DS4Windows Software. This software enables your controller to work smoothly with Windows.
  3. Navigate to Battery: title:
  4. Battery levels will be displayed and can be monitored.

Method # 2) Via Steam

  1. Connect the PS5 controller to your computer.
  2. Find it Steam icon and click on it.
  3. It is located in the upper right corner battery indicator logo will display the amount of charge on your controller at that time.
  4. If you can’t see the icon, click the gear icon to go Settings.
  5. The controller batteries will be displayed and thus controllable.

How to charge the PS5 controller battery

If you find your controller needs charging after checking the battery life, simply connect the controller’s USB cable to your PS5 console. It will now start charging, indicated by a small animated battery icon.

How to make your PS5 controller battery last longer

Getting up intermittently to charge the controller can be a hassle if you’re immersed in gaming. So here are some tips to ensure your battery life lasts and you can enjoy longer uninterrupted sessions.

Method #1) Reset the DualSense controller

Resetting the controller removes any software glitches it may have encountered. You can reset your DualSense controller with the following steps:

  1. First, turn off the DualSense controller.
  2. Next, find reset button on the back of the controller. It is located next to the Sony logo.
  3. Using a thin object such as a paperclip or needle, press reset button.
  4. Release the button after pressing it five to seven seconds.
  5. Turn the controller back on. Now this will refresh your battery life.

Method #2) Turn on the automatic shutdown option

As we’ve confirmed before, leaving the controller plugged in after gaming can cause it to drain quickly. The PS5 has a built-in feature to combat this.

  1. Click on Settings the icon.
  2. Navigate to System: version
  3. to go “Set time until controller turns off.” Choose a convenient option from the list of 10, 30 and 60 minutes. Ten minutes is the most ideal.
  4. Your controller will now turn off after a set period of inactivity.

Method #3) Use a proper charger

Always use chargers that come with the controller or the console itself. Poor quality chargers can drain battery health or charge the controller very slowly. You can also buy the PlayStation DualSense charging station from Amazon. It allows you to charge two controllers at once.

Method #4) Reduce the intensity of the trigger and vibration

The higher the trigger intensity and vibration intensity of your controller, the more it will vibrate and drain the battery. Follow the steps below to charge your controller with minimal interruption to the perfect gaming experience.

  1. Navigate to Settings and choose Accessories.
  2. Click on Controllers menu.
  3. Choose: trigger Intensify. Set it to weak or disable it.
  4. Choose: Vibration intensify. Set it to weak or disable it.

If you’re playing a game where you don’t want to feel vibrations, turn this option off altogether.


To ensure your controller is charged and ready for heavy gaming, you should check its battery life on a PC or your PlayStation5. Battery life can run out intermittently, and monitoring it will help you keep it charged. We hope this guide helps you navigate the process and prepare you for a smoother game.

Leave a Comment