FIX: Windows 10/11 downgrades by itself. – wintips.org

If Windows 10/11 turns down on its own, continue reading below to troubleshoot.

One of the strangest problems you may encounter in Windows 10/11 is that the mouse automatically moves to the bottom of the screen without any user action. As you can see, if Windows starts spinning up or down uncontrollably, or if the indicator moves from one side to the other on its own, it’s very annoying and can make your computer unusable.

Automatically scrolling the mouse down or up may indicate a problem with your computer’s hardware or software, and we’ll help you fix the problem in this article.

How to fix: Mouse scrolls down on its own in Windows 10/11.

Step 1: Check the hardware.

If you’re using a laptop touchpad or an external mouse, there are a few simple steps you can take to determine if your hardware is causing your mouse to spin out of control.

  1. Unplug and reconnect use the mouse and see if the problem persists. Also, make sure that dirt does not block the scroll wheel of the mouse.
  2. plug the mouse or mouse receiver (if your mouse is wireless), to another USB port.
  3. Make sure it’s on the keyboard The end or Arrow down key(s) is not printed or damaged. This can force Windows to scroll down automatically.
  4. If you are using a wireless mouse, replace the battery and check if the problem is gone.
  5. If you are using a laptop with an external mouse, unplug it and see if the problem persists. If yes, turn off the computer and clean the surface of the touch panel. If the touchpad is wet or oily, the cursor may behave strangely.
  6. See if the problem occurs with another mouse or check the mouse on another computer.
  7. Remove any other pointing devices you may have, such as USB pen tablets or game controllers.
STEP 2: Troubleshoot software issues.

If after performing the above steps, Windows 10/11 still goes to the bottom of the page or the mouse is not working properly, the problem is wrong Windows settings, recent unstable updates or wrong mouse may occur due to drivers. In this case, follow these steps:

  1. Turn off the “Rotate inactive windows when hovering over them” option.
  2. Remove the mouse and touchpad drivers.
  3. Scan and repair system files.
  4. System Restore.

Method 1: Turn off “Rotate inactive windows when hovering over them” option.

This issue was reportedly resolved by changing the Mouse settings.

1. click on Windows the key + I to run Settings app.

2. Select in the right panel Bluetooth and devices, then press Mouse. *

*Note: On Windows 10, go to Devices > Mouse.

Windows 10/11 Scroll down by itself.

3. Delete option Hover over inactive windows Under Transfer Options.

FIX mouse scroll down by itself - Windows 10/11

4. Once this is done, the mouse will usually stop scrolling down on its own. However, if the problem persists, proceed to the next method.

Method 2: Uninstall and reinstall the mouse/touchpad drivers.

The next way to solve the “mouse automatically scroll down” problem is to remove all mouse drivers from your PC and reinstall them. For this:

1. Right click enabled the Start menu and select Device Manager.

device Manager

2. Expansion Mouse and other pointing devices after that right click on each pointing device (mouse or touchpad) and select Turn off the device. *

*Note: If you have a laptop take down only all mouse drivers and restart your personal computer. Then, if the problem persists, delete and touch panel driver(s).

fix automatic mouse scroll down

3. A dialog box will appear with a warning. Choose Delete to confirm the removal.

4. Do the same for all installed mouse or touchpad drivers and when prompted restart your computer. *

turn off the device

* Note. If during the operation you “lose” the mouse, click ALT + F4 and Enter for to close your personal computer. Then turn it on again.

5. After the computer is turned on, the appropriate driver for the mouse (or/and touchpad) will be reinstalled. Check if the issue is resolved and if it remains, move on to the next method.

Method 3: Scan and repair Windows system files.

System File Checker is a command-line tool for scanning and repairing corrupt or missing system files in Windows and can solve many problems.

1. Open command prompt as administrator.

1. Enter the following in the search field: cmd or command line
2. right click on it command line (result) and select Run as administrator.

command line administrator

2. In the command prompt window, type the following command and click Enter:

  • Dism.exe /Online /Clean-Image /Restorehealth

3. Please be patient while DISM fixes the component store. After the operation is complete, (you should be notified that the corruption in the component store has been fixed), give this command and press the button. Enter:

image

4. Once the SFC scan is complete, restart check your computer and everything is working properly.

Method 4: Perform a system restore.

If the problem persists, you can restore the computer to the state it was in before the problem occurred. For this:

1. press at the same time Windows image + R buttons to openRunning‘ command window.
2. In the Run command field, type rstrui and press Enter.

open system restore

3. press The next one on the first screen.
4. Tick Show more restore pointsselect a time when your computer worked well and click on it The next one.

fix windows scrolling down by itself - system restore

5. Finally click Termination to restore your PC on the selected date.

fix the mouse scroll down by itself - system restore

6. Depending on the speed of your computer and the number of files on it, the recovery process may take a few minutes or an hour. So, be patient until it finishes and the computer reboots into Windows.

That’s it! Which method worked for you?
Let me know if this guide helped you by leaving a comment about your experience. Please like and share this guide to help others.

If you found this article useful, please support us by donating. Even $1 can make a big difference for us We continue to help others while keeping this site free:

Leave a Comment